Filter Retainer, 20/Bx - 501

Use with 3M™Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. When properly selected, cartridges and filters help provide protection from a variety of gases, vapors and particulate hazards. Available with 3M™Service Life Indicator, an end-of-service-life indicator (ESLI) that can help users determine when to change cartridges in appropriate environments.

• Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors.
• Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases.
• 3M™recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone.
• OSHA regulations require gas proof goggles be worn with half facepiece respirators when used against formaldehyde.
• Only 3M™filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M™5000 Series Respirators. Cartridges on 5000 Series Respirators cannot be replaced. The 3M™Filter Adapter 502 is required for use of the 2000 Series and 7093 filters with the 5000 Series Respirators and 6000 Series Cartridges. The 3M™Filter Retainer 501 is required for use of the 5N11 and 5P71 prefilters with the 5000 Series Respirators. The 502 adapter cannot be reused.

*** Due to the demand of Covid-19 related items. Please beware these items are out of stock and are experiencing extended lead times. ***

• Designed to hold 3M™ particulate filter 5N11 and 5P71/07194 (AAD)
• Component works with 3M™ respirator 5000 Series, 3M™ cartridges 6000 Series and 3M™ filter adapter

• Short Description - PREFILTER RETAINER CLIP
• Alternate Part Number - 70070190734
• Standard Packaging Information - 20/Pack, 100/Case
• Item Name - Filter Retainer Clip
• Material - Polypropylene
• Suitable For Use With - Full Facepiece Respirator
• Dimensions - 8-1/2 in L x 4 in H x 4-1/2 in W
• Marketing Description - The 3M™ filter retainer 501, respiratory protection system component holds 3M™ particulate filters 5N11 and 5P71/07194 (AAD) in place on top of 3M™ respirators 5000 Series, 3M™ cartridges 6000 Series and 3M™ filter adapter 603 (all respirators, filters, cartridges and adapters sold separately).
• Color - Translucent White